MTC / CoC
- Heat/Lot traceability
- Grade & standard conformance
- Signed PDF with stamp
PAN-India Delivery
2–6 business days via trusted couriers
Quality Reports
Traceable. Tested. Compliant. ISO/DIN/IS backed inspection with ISO 9001:2015 QMS.
Request Report
Note: Reports may incur additional charges where applicable.
Our QMS: ISO 9001:2015. Download Certificate
Dimensional
- ISO/DIN/IS/ASME B18 checks
- Thread GO/NO-GO (ISO 1502)
- Head/AF/length/pitch
Mechanical
- UTS · YS · Proof · Elongation
- Hardness per ISO 898-1
- Pass/Fail vs spec
Chemical
- Spectro % vs grade limits
- Heat treatment / decarb note
- Lab & date
Finish & Corrosion
- Coating thickness (µm) avg/min
- Salt spray (ASTM B117) hours
- Visual defects checklist
Compliance
- RoHS/REACH status
- Country of Origin
- PPAP L1–L3 (OEM)
Certifications & Docs
- ISO 9001:2015 — Download
- BS EN 10204: 2.1 CoC, 3.1, 3.2
- Original Mill Certificate (OMC)
- Third-party test reports (accredited laboratories)
- ISIR (Initial Sample Inspection Report)
- FAIR (First Article Inspection Report)
- ITP (Inspection & Test Plan)
- Heat-treatment furnace charts
- Plating/Coating CoC
- Calibration certificates (gauges/torque)
Additional Testing (On Request)
- 100% hardness screening
- Full-size tensile testing
- Charpy impact testing
- Carburisation / De-carburisation
- PMI (Positive Material Identification)
- Flaw detection: MPI & DPI
- Microstructure examination
- Ultrasonic testing (UT)
- Wedge testing
Sampling Plan & Methods
- AQL (ANSI/ASQ Z1.4): typical General II; AQL 1.0 (dimensions), 0.65 (threads)
- Thread gauges per ISO 1502; micrometers/calipers; coating thickness meters
- Equipment calibrated to ISO/IEC 17025 certificates (on file)
- Measurement uncertainty stated on request
Report Fields (Per Line Item)
| PO | SKU | Standard | Grade | Size | Lot/Heat | Dimensional | Mechanical | Chemical | Finish | Salt Spray | Compliance | Inspector |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PO-4589 | M12×60 SHCS | ISO 4762 | 12.9 | M12×60 | H23791 | OK | UTS/YS/Hardness: PASS | Within spec | Zn 8–10µm | >240h | RoHS/REACH | QA-01 |
Sample Downloads
Delivery & SLA
- Formats: Signed PDF (default); CSV/XML on request
- Turnaround: 24–72 hours (standard), expedited available
- Pricing: Basic CoC/MTC free with bulk orders; advanced tests/PPAP chargeable
Non-Conformance & CAPA
- Raise NC with PO/Lot & photos
- 24–48h response with containment
- Root cause + corrective action
- Replacement/credit as per policy
FAQs
Which standards do you test to?
Dimensions: ISO/DIN/IS/ASME; Mechanical: ISO 898-1 / ASTM A370; Threads: ISO 1502; Corrosion: ASTM B117.
What’s the difference between MTC and CoC?
MTC lists actual test results per heat/lot. CoC declares conformance to the PO/spec.
Can you provide BS EN 10204 3.2?
Yes — available on request.
Do you support PPAP?
Yes, Levels 1–3: Control Plan, PFMEA, PSW, dimensional/layout, and material results.